HobbyKing
ASP S61A TWO STROKE GLOW ENGINE W/REMOTE HS NEEDLE VALVE
| Displacement | 9.95 |
| Bore | 24.00mm |
| Stroke | 22.00mm |
| Suggested prop | 11*6 |
| RPM | 2,000 ~ 18,000 |
| Weight | 675g |
5 Reviews
HobbyKing
ALPHA TYPE 2 PISTON STIRLING ENGINE
,
This Stirling engine is a heat engine that operates by ...5 Reviews
HobbyKing
ASP S61A TWO STROKE GLOW ENGINE
| Displacement | 9.95 |
| Bore | 24.00mm |
| Stroke | 22.00mm |
| Suggested prop | 11*6 |
| RPM | 2,000 ~ 18,000 |
| Weight | 675g |
5 Reviews
HobbyKing
XY ENGINE MUFFLER (26CC-A)
,
XY Engine Muffler (26cc-A) Original replacement parts.5 Reviews
HobbyKing
XY ENGINE PISTON RING PART 26 (26CC-A)
,
XY Engine Piston Ring Part 26(26cc-A) Original replacement parts. Only ...5 Reviews
HobbyKing
RCG 50CC GAS ENGINE 5.2HP/7500RPM
| Performance | 5.2hp @ 7500rpm |
| Idle | 1350rpm |
| Thrust | 13.6kg @ 100mtr / 11.5kg @ 1800mtr (Above sea level) |
| Suggested prop | 22x8, 22x10 |
| Spark Plug | CM6 |
| Bore/Stroke | 44 x 35mm |
| Compression | 7.5 |
| Weight | 1360g |
Ratio of lubricating capacity: 30:1,
RCG quality engines have proven themselves the world over for ...5 Reviews
HobbyKing
ASP S52A TWO STROKE GLOW ENGINE W/REMOTE HS NEEDLE VALVE
| Displacement | 8.47 |
| Bore | 22.40mm |
| Stroke | 21.50mm |
| Suggested prop | 11x7 or 12x6 |
| RPM | 2,000 ~ 18,000 |
| Weight | 484g |
5 Reviews
HobbyKing
HEAVY DUTY ARM SET (GOOD FOR 100CC ENGINES)
,
Heavy Duty Arms (good for 100cc engine)5 Reviews
HobbyKing
ASP S52A TWO STROKE GLOW ENGINE
| Displacement | 8.47 |
| Bore | 22.40mm |
| Stroke | 21.50mm |
| Suggested prop | 11x7 or 12x6 |
| RPM | 2,000 ~ 18,000 |
| Weight | 484g |
5 Reviews
HobbyKing
STIRLING ENGINE SE-1
| Height | 200mm (8in) |
| Width | 100mm (4in) |
| Length | 170mm (7in) |
| Weight | 1.8kg |
Specs:,
This Stirling engine is a heat engine that operates by ...3 Reviews
HobbyKing
REPLACEMENT COMPLETE IGNITION SET FOR SINGLE CYLINDER GAS ENGINES
| Includes | Ignition Unit |
5 Reviews
HobbyKing
XYZ CRANK, PIN & PROP BOSS KIT, ENGINE PART NUMBER 4 & 11 & 12 (26CC)
,
XYZ Crank, Pin & Prop Boss Kit, Engine Part Number ...HobbyKing
FTL-ENGINES HALL SENSOR PART # 014 LONG
| Cable Length | 385mm |
5 Reviews
HobbyKing
TURBINE ENGINE FOD GUARD - 98MM
| Outer Diameter | 98mm |
| Inner Diameter | 81mm |
| Inner Diameter | 32mm |
| Overall Hight | 48mm |
5 Reviews